RV Adjustable Bed:  One King bed consisting of Two custom-sized synchronized adjustable beds for Fifth Wheel Motor home .

Custom Adjustable Bed– Doppelflex MX2 adjustable bed with two motors for each bed

PLATFORM IS 76 X 80 INCH. NEED ALL AROUND 1.5 INCH AIR GAP FOR HEAD SECTION TO MOVE WITHOUT GRAZING SIDE TABLES RESULTS IN NET PLATFORM SPACE 73 X 78.5 INCH.

TWO CUSTOM ADJUSTABLE BEDS SYNCHRONIZED TO WORK TOGETHER AS CUSTOM KING BED. EACH APPROX 36 X 78 INCHES. ADD FOUR MORE DOUBLE SLATS FOR A TOTAL OF TEN DOUBLE SLATS FOR EACH ADJUSTABLE BED.

PLATFORM HINGE LOCATION IS 30INCHES FROM HEADBOARD, CUT EXTERNAL FRAME 31 INCHES FROM BACK FOR REMAINING FRAME TO BE SCREWED ON PLATFORM THAT IS RAISED FOR STORAGE ACCESS

Mattress Model: DW 200 FIRM (NOT HARD) Mattress.  CUSTOM SIZE APPROX 73 X 79 INCHES.

RV Model: PARADIGM ALLIANCE

Customer: REZA BASHAR

Location: AGUANGA, CA

TWO CUSTOM HALF KING ADJUSTABLE BEDS SCREWED ONTO PLATFORM SIDE BY SIDE WITH ONE CUSTOM KING MATTRESS SECURED BY FOOT AND SIDE STOPPERS FROM SLIDING OFF.

PLATFORM CAN BE RAISED NORMALLY TO ACCESS STORAGE. USED EXISTING RAISING MECHANISM.

PHOTO OF RIGHT SIDE OF BED TO SHOW THE AIR GAP THAT IS REQUIRED  BETWEEN THE HEAD SECTION AND THE SIDE TABLE SO THE BACK OF THE ADJUSTABLE BED DOES NOT GRAZE THE SIDE TABLE WHEN IT IS BEING RAISED. ALSO NEED TO FACTOR OUT THE THICKNESS OF THE HEADBOARD FROM THE OVERALL LENGTH OF THE PLATFORM. IN THIS CASE, THE PLATFORM WAS 80 INCH LONG AND WE SHORTENED THE FOOT PRINT TO 78.5 INCHES TO FACTOR OUT THE 1.5 INCH THICK HEADBOARD.

LEFT SIDE OF BED WITH SIMILAR AIRPGAP BETWEEN THE SIDEOF THE BED AND THE SIDE TABLE.

BED WITH HEAD AND LEG SECTIONS RAISED TO SHOW ADJUSTABLE PROFILE. NOTICE THE HEAD SECTION WHEN FULLY RAISED HAS PLENTY OF ROOM LEFT SO THE HEAD WILL NOT HIT THE UNDERSIDE OF THE WOOD FRAME ABOVE THE BED.

FINAL VIEW OF THE BED PLATFORM RAISED TO ACCESS STORAGE.