RV Adjustable Bed:  Two independently operated adjustable beds.

Custom Adjustable Bed– Doppleflex MX2 All-Slat adjustable bed with two motors for each bed

Platform is 60 X 75 inches  Factoring out the headboard of 1.5 inch, the Net Platform Footprint is 57 X 73 inch.

Two custom half King adjustable beds each 28″ x 72.5″. To lift platform for storage access, cut back external frame 2 inches. (Platform hinge location is at the headboard).

Both adjustable beds with “Straight Back” option so the head and back raise together in one plane. The suspension of both beds can be adjusted for different firmness configurations by changing the settings of the double slats of the adjustable bed suspension. In this case, we added 2 extra double slats to the standard 6 double slats for a total of 8 double slats for both beds which can be adjusted for varying degrees of firmness.

Mattress Model:

Dreamwave 800 Medium-Firm to the Comfy Mattress.

Each Custom mattress, 28 X 74 inches.

RV Model: 2004 34 foot Holiday Rambler 

Customers:  Paul & Anna Woodson

Location: Lucerne Valley, CA.

Thank you Paul and Anna for sharing photos of their installation!

Placed the two adjustable beds and screwed them onto the platform with supplied L-shape brackets.

You can see that the frame rested just inside the platform so that the upper head side stopper did not interfere with the window valence.

We installed an extension cord and made two holes: one on the side of frame and another under the platform to snake the cable to the top of the platform (see below for more).

This shows how we snaked the extension cord with two outlets to the top of the platform.

Platform is fully raised and held in place by the shocks.

Here the bed is partially lowered half way.

After attaching the side stoppers on both sides of the beds to prevent the mattresses from sliding off, we added the two foot stoppers. Those were lined up to match the desired location of each mattress.

The first mattress is in place.

The right side of the mattress is held in place to avoid grazing the window valence when the back of the bed is raised.

Again the left side of the mattress is held in place by the two side stoppers to avoid grazing the window valence when the head and back of the mattress is raised up.

Once again, Paul and Anna settling in!