FIFTH WHEELER RIVERSTONE LEGACY 39 RKFB
RV Adjustable Bed: Two independently operated Fifth Wheel Motor home adjustable beds.
Custom Adjustable Bed– UBERFLEX MX 4 adjustable bed with FOUR motors for each bed
The 4 motor (each bed) Uberflex MX4 is our most adjustable bed with s sophisticated hybrid suspension consisting of slats and pods which can be configured to change firmness for the back, bottom and thighs as well as change the angles of elevation in four sections. The head, back, thigh and foot elevation.
Here is the description with videos: https://www.axelbloom.com/uberflexmx4
PLATFORM IS 70.5 X 77.5 INCHES WITH MORE THAN 1.5 INCH CLEARANCE ALL AROUND SIDE AND FOOT SECTION AND HEADBOARD NOT INTRUDING ONTO PLATFORM
– TWO CUSTOM ADJUSTABLE BEDS, EACH APPROX 35 X 77.5 INCHES. ADDED FOUR MORE DOUBLE SLATS FOR A TOTAL OF TEN DOUBLE SLATS FOR EACH ADJUSTABLE BED.
– TWO CUSTOM MATTRESSES DW 800, EACH APPROX 35 X 78 INCHES. MEDIUM-FIRM (TO THE COMFY)
PLATFORM HINGE LOCATION IS 27.5 INCHES FROM HEADBOARD, THEN WILL CUT EXTERNAL FRAME 28 INCHES FROM BACK FOR REMAINING FRAME TO BE SCREWED ON PLATFORM THAT IS RAISED FOR STORAGE ACCESS.
Mattress Model: DW 800 Medium-Firm to the Comfy Mattress. Each mattress 28.5 x 75 inches,
RV Model: Riverstone Legacy
Similar Riverstone Legacy model to another customer installation https://axelbloombeds.com/2024/05/08/axel-bloom-adjustable-bed-riverstone-legacy-fifth-wheeler/
Customer: Scott and Lucille
Yong,
You have restored my faith in customer service! You are and continue to be engaged throughout the process and I have no doubt that you will continue to do so. Class act!!!
Scott
Dear Scott and Lucille – It has been a pleasure working with you and sharing thoughts about this wonderful USA!
Yong
The delivery of the boxes via Fedex Freight!
Beginning to open the boxes. We double box the boxes so be prepared to spend a lot of effort and time to open them. Careful with the blade so you do not accidentally cut into the bed frames and mattresses!
Scott replaced the struts so that each strut can bear a load of 120 pounds (from 60 pounds). Out system is about 75 pounds per bed plus 40 pounds for each mattress so for two independent beds, a total of 230 pounds. He also took the opportunity to reinforce the floor of the storage compartment. (see photo below of original storage area).
This is a silent video of his installation.
Scott is describing the features of the Four motor Uberflex MX 4 system to Lucille.
Lucille expands on the features of the bed system.
Location of the wireless controller resting in the black receptacle. This controller communicates with a black control box that controls the four motor adjustable bed,