RV Adjustable Bed:  Two independently operated Fifth Wheel Motor home adjustable beds.

Custom Adjustable Bed– Doppelflex MX2 adjustable bed with two motors for each bed

PLATFORM IS 70.5 X 77.5 INCHES WITH MORE THAN 1.5 INCH CLEARANCE ALL AROUND SIDE AND FOOT SECTION AND HEADBOARD NOT INTRUDING ONTO PLATFORM
– TWO CUSTOM ADJUSTABLE BEDS, EACH APPROX 35 X 77.5 INCHES.  ADDED FOUR MORE DOUBLE SLATS FOR A TOTAL OF TEN DOUBLE SLATS FOR EACH ADJUSTABLE BED.
– TWO CUSTOM MATTRESSES DW 800, EACH APPROX 35 X 78 INCHES. MEDIUM-FIRM (TO THE COMFY)
– ONE DEFAULT HEAD/BACK MOVMENT AND ONE BED WITH “STRAIGHT BACK OPTION”
PLATFORM HINGE LOCATION IS 27.5 INCHES FROM HEADBOARD, THEN WILL CUT EXTERNAL FRAME 28 INCHES FROM BACK FOR REMAINING FRAME TO BE SCREWED ON PLATFORM THAT IS RAISED FOR STORAGE ACCESS.

Mattress Model: DW 800 Medium-Firm to the Comfy Mattress. Each mattress 38 x 78 inches,

RV Model: Riverstone Legacy

Customer: Larry Jenkins

Location: Covington, GA.

START OF PROJECT. NOTE THAT HEADBOARD IS HIGH ENOUGH TO NOT INTERFERE WITH PLACEMENT OF HEAD SECTION OF THE ADJUSTABLE BED.  MORE OFTEN THE HEADBOARD STOPS THE PLACEMENT OF THE HEAD SECTION AND WE HAVE TO REDUCE THE LENGTH OF THE ADJUSTABLE BED BY THE THICHKNESS OF THE HEADBOARD.

THE FIRST ADJUSTABLE BED IS SCREWED DOWN ON PLATFORM. THE PLATFORM CAN THEN BE RAISED BECAUSE THE EXTERNAL FRAME CAN BE CUT AT THE HINGE LOCATION. THE INNER ADJUSTABLE BED CAN THEN FLEX AT THE HEAD SECTION TO ACCOMMODATE THE BEND OF THE PLATFORM. THIS FEATURE CANNOT BE PERFOMED BY A REGULAR ADJUSTABLE BED WITH A RECTABGULAR STEEL FRAME SINCE CUTTING THE FRAME WOULD DESTROY THE RIGIDITY OF THE FRAME.

THE INDIVIDUAL BEDS ARE ADJUSTED. THE ONE ON THE LEFT HAS A “STRAIGHT BACK” OPTION WHERE THE HEAD SECTION IS PURPOSELY MADE TO RAISE AT THE SAME TIME AS THE BACK SO THEY BOTH RAISE IN ONE PLANE. CUSTOMER WHO SLEEP ON THEIR BACK (E.G. FOR ACID REFLUX) PREFER THIS OPTION AS THE HEAD/CHIN IS NOT TIPPED FORWARD. THE STANDARD MODEL BEGINS WITH THE HEAD BEING RAISED 30 DEGREES BEFORE THEN RAISING THE BACK. FOR SIDE SLEEPERS, THIS ALLOWS THE SHOULDER TO REMAIN UNDISTURBED AND THE HEAD SECTIONCAN BE CUSTOM RAISED TO VERY PRECISELY AND GRADUALLY.

LOOKS SUBLIME! LOTS OF ROOM TO WALK AROUND THE BED. THE HEIGHT OF THE ADJUSTABLE BED IS 4.5 INCHES. THE MATTRESS IS 7.5 INCHES SO THE TOTAL HEIGHT OF THE BED IS 12 INCHES FROM THE EXISTING PLATFORM.