RV Adjustable bed: Custom Doppelflex MX2
Two 2 – motor custom Adjustable systems (each 35 X 79 inch) . Independently adjustable systems with 10 double slats to firm up or soften the lumbar region. Piano hinge to lift platform to access storage is 30 inches from the headboard. To continue to access the storage compartment, cut the external frame 30.5 inches from the back of the adjustable bed. The remaining 49.5 inches of the external frame is screwed on the lower platform with four L-shape brackets for each adjustable bed that are pre – installed. This allows the lower platform to be lifted up, as per normal, to access the storage area, without the whole adjustable bed being lifted off the platform.
For further information, click here: https://luxuryrv.axelbloom.com/pages/rv-installation-guide-for-adjustable-beds
RV Mattress model: DW 800 Medium Firm (to comfy) Mattress. Two custom mattresses, each 35 X 80 inches.
RV Model: 2021 Newmar Bay Star
Location: Castro Valley, California
Customer: George and Lynn Pacheco
Lynn is originally from Pennsylvania and George is from California. They own a Landscape business in northern California. They drove to Los Angeles to have Axel Bloom install their system.
The two adjustable beds installed with the transformers located in the storage compartment under the bed. Note that we rested the adjustable base on the edge of the flat platform. There are four extra double slats to bring the total to ten double slats. Moving the coffee – colored sliders further apart makes each double slat firmer.
Both mattresses placed side by side. Note that the top of the upper left mattress just passes by the side of window valence. George intends to have his local carpenter either remove or modify the lower section of the window valence so it does not touch the adjustable bed when the back is raised.
To raise the platform, first raised the back of the adjustable bed, then lift the platform. The factory supplied struts are sufficient to hold the bed up. George plans to add a wooden stick to support the platform when it is raised. The stick would be hinged under the platform at one end and have a strip of Velcro hold up the other end of the stick. That end of the stick then drops down to keep the platform up.
The two transformers for the motors are placed in the storage compartment. A cable extension taps power from outside the compartment to power the two transformers. The power cables are then snaked through a common hole in the center of the platform to connect with the two motors.
Finally, a chance to relax!
Looking forward to a restful night!