Client Profiles, Gallery, Installation, RV Adjustables

AXELBLOOM RV ADJUSTABLE BED: TIFFIN ALLEGRO BUS 40 IP

on/Comments closed

“ALL IS GOOD , IT IS GOING TO WORK OUT GREAT!”

Cliff and Marianne Fowler

RV Adjustable bed: Custom King Doppelflex MX2

Two independently operated 2 – motor custom Half – King Adjustable system ( 35 X 72 inch) screwed on 71.5 X 72 inch platform in four places with L-shape brackets. Piano hinge to lift platform to access storage is 25 inches from the headboard. To continue to access the storage compartment, cut the external frame 26 inches from the back of the adjustable bed. The remaining external frame is screwed on the lower platform with four L-shape brackets for each adjustable bed that are pre – installed. This allows the lower platform to be lifted up, as per normal, to access the storage area, without the whole adjustable bed being lifted off the platform.For further information, click here: https://luxuryrv.axelbloom.com/pages/rv-installation-guide-for-adjustable-beds

In addition, one adjustable has the head and back sections set up to move in one plane; the other adjustable has the default setup. The default is to allow the head to raise up first without moving the lumbar/shoulder. Side sleepers love it but some people with GERD/Acid reflux , prefer to sleep on their backs and do not like the head to be tipped forward. The ‘Straight Back ” option addresses that desire for a flat head/back motion.

RV Mattress model: Two DW 800 mattress medium firm to the comfy. each 35 x 72 inches

RV Model: Tiffin Allegro Bus 40IP

Location: Oracle, AZ

Customer: Marianne and Cliff Fowler

We installed it in Los Angeles. Here is the beginning when we checked that we could access power from the back of the storage compartment. Proceeded to make a hole on the platform so we could drop down the two transformer cables into the storage area.

Overall view with platform raised.

Placed one adjustable to check fitment. All good.

Second adjustable placed within the side rails of the platform.

Installed foot stopper.

Side stoppers installed. Two on each side. Mattress cover partly hiding it on the left about quarter of the way from foot.

Complete bed raised half the way up. No need to change struts.

View from the door.

Each back raised to different height. The one on the right is has default head motion first, then back raised. The left adjustable has the modified straight back. Both backs can still be raised by another 30 degrees.

Note that the mattress clearance is tight when the back is raised but the cover is thick and smooth so does not interfere with window valence.

Same here.

View of foot section clearing the left dresser when the slider is moved in.

Finally in Bed!

The length of the mattress is 72 inches that is limited when the slider is brought in. Might win another inch by moving the foot stopper further down by an inch.