RV Adjustable Bed

PROPOSE BED SYSTEM SIMILAR TO
https://axelbloombeds.com/2021/02/07/axel-bloom-class-a-adjustable-bed-for-2018-winnebago-27pe/
https://axelbloombeds.com/2020/11/30/axel-bloom-rv-adjustable-bed-2018-dynamax-isata-3/

Custom King Doppelflex MX2 TWO-MOTOR ADJUSTABLE SYSTEM (31.5″ x 75.0″ – Custom RV Dimensions). OP SECTION LENGTH OF APPROX 45 INCH TO FIT UPPER PLATFORM LENGTH OF 47 INCHES.

Mattress Model: Dreamwave DW 800 (medium-firm,to the comfy)  Two custom mattresses, each 31 X 75 inches.

RV Model: 2022 Entegra Esteem

Customer Location: Phoenix , AZ

Customer: Lisa Malachowsky and Bev Crair

Uber Sports Organizers: Scuba Diving and Motorbike excursions around the world!

https://divenrideadventures.com/

This was a local installation by our team and it took 2 hours.

HOW DID WE GET HERE?  READ ON…..

We placed the two adjustable beds to make sure the custom dimensions of the pre-made sections were correct and that the side stoppers and electrical outlets were accessible.

You can see the side view that we were correct in the width so the back of the adjustable bed would not graze the side table when it was raised.

Same on the left bed. we installed the white transformers on top of the platform, under the section of the bed that does not move.

Close up of the side to show how important it is to take correct measurements for the custom bed.

Since the lower foot section of the adjustable bed folds down onto a lower separate platform, we needed the customer to inform us how landing feet should be. You can see those special blocks of wood that behave as the feet. you can see how the foot section curves backwards below.

We made the foot section flush with the foot platform when the platform is slid out.

This shows the raised lower section foot assembly.

Another angle of that foot assembly.

The upper section of the bed is anchored by steel L-shape brackets on the fixed portion of the platform.

Here is the left side that is similarly anchored to the platform.

We had to crawl into that space to screw down the brackets.

Job completed to secure the adjustable beds.

All flat with slider in out position.

View from the entrance to the bed room.

We went to Home Depot for the hooks and bungee cords to secure the folded lower sections and mattresses.

Another view of the same.

Last view.

Lisa and Bev, the customers, and Wolfgang, all the way from Austria. Our very good friend with whom we stated this business with his company 20 years ago!

Old and new friends together! I am looking forward to a scuba excursion with them!

Entegra Esteem. all ready for the road and a great sleep!